Power steering hose change

Power steering hose change

This TSB applies to 2004-2012 Nissan Armada and 2004-2012 Titan vehicles.

If the high pressure power steering hose needs to be replaced for any reason:

  • The new hose now comes without the pressure sensor.

  • When replacing the hose, reuse the existing pressure sensor. Replace the pressure sensor only if there is a pressure sensor related issue.

  • Do not replace other related hoses unless necessary.

  • Do not damage the pressure sensor during removal or installation.

  • Always use a new O-ring when installing a new or existing pressure sensor.

  • Pressure sensor mounting torque is 14.5 ft-lb (19.6 Nm).

  • Always replace both copper crush washers (mounted at the power steering pump).

PS Hose/Tube assembly…………49720-7S00A (w/o sensor)

Copper washer (pair)……………49726-Y0100

O-ring seal………………………49345-6N200

PS pressure sensor………………49763-6N20A

Replacement high pressure power steering hoses are now supplied without a pressure sensor. Replace the sensor only if you find a sensor related issue.
Replacement high pressure power steering hoses are now supplied without a pressure sensor. Replace the sensor only if you find a sensor related issue.
 
Last modified onWednesday, 04 February 2015 14:07
     

   Related items


Comments
Login to post comments

MOD_LOGINREGISTER_LOGIN_TITLE

Remember Me